The Orbitrap Fusion Tribrid 质谱仪使科学家能够分析更具挑战性的低丰度、高复杂性样品，并能更快地识别更多化合物，同时定量更准确，结构解析更透彻。
绝佳的性能
超高分辨率，高达 500,000 FWHM，可消除干扰
母离子选择使用四极杆质量过滤器，使离子阱和 Orbitrap 质量分析器可以并行操作，以获得出色的灵敏度和选择性
多重解离技术——CID、HCD 和可选 ETD——配有离子阱或 Orbitrap 检测可以在任何 MSn 级别进行检测，最大程度提高其在研究应用中的灵活性
碎片的灵活性——CID-HCD、HCD-CID 和 HCD-HCD——在 MSn 分析的任何阶段与任一质量分析器检测的碎片离子一起，可以对代谢物、多糖和其他小分子进行详细的结构测定
带轴向场的主动离子束传输组件可以降低噪声并增加耐用性
新型 Orbitrap 分析仪设计和双压离子阱配置可以提供快速 MS/MS 扫描，扫描率高达 20 Hz，具有无与伦比的谱图质量
Thermo Scientific™ Easy-Max NG™ 与可选的 Thermo Scientific™ Ion Max NG™ 及 Nanospray Flex NG™ 离子源均为具有下一代性能的离子源
易于使用
动态扫描管理帮助用户轻松获得样品的最多信息，最有效地安排扫描事件，并使用最佳裂解模式和质量分析器智能匹配每个母离子
适合通用实验的默认特定应用模板库可以简化方法开发过程
兼容 Thermo Scientific™ Compound Discoverer™、Mass Frontier™、Pinpoint™、Protein Deconvolution、Proteome Discoverer™、ProSightPC 和 SIEVE™ 软件以提升特定应用的生产率
性能参数：
Mass Range
Linear Ion Trap and Orbitrap Mass Range:
Standard – m/z 50–2,000
High Mass – m/z 200–4,000
Orbitrap Extended Mass Range:
Up to m/z 6000 without precursor ion selection
Resolution
15,000-450,000 (FWHM) at m/z 200
Scan Rate
Orbitrap MSn up to 20 Hz
Ion trap MSn up to 20 Hz
Mass Accuracy
< 3 ppm RMS using external calibration
< 1 ppm RMS using internal calibration
MS/MS Sensitivity of Ion Trap
2 μL of a 50 fg/μL solution of reserpine (100 fg total) injected at a flow of 500 μL/min will produce a minimum signal-to-noise ratio of 100:1 for the transition of the isolated protonated molecular ions at m/z 609 to the largest two product ions, m/z 397 and m/z 448, when the mass spectrometer is operated at unit resolution in the full-scan MS/MS mode, m/z 165–615. The test requires the HESI probe.
Dynamic Range
> 5,000 within a single scan, guaranteeing specified mass accuracy
MS Scan Power
MSn, for n = 1 through 10
Thermo Scientific™ EASY-ETD™ Ion Source
• Generates fluoranthene anions for electron transfer dissociation (ETD)
• Townsend discharge ionization is extremely stable and robust
• Compact size, located entirely within the footprint of the instrument
• Active reagent ion filtering using mass-resolving quadrupole
Thermo Scientific™ EASY-IC™ Ion Source
• Generates internal calibrant ions for real-time mass calibration on every spectrum
• Provides <1 ppm RMS mass accuracy
Synchronous Precursor Selection
Up to 15 precursors per MS2 scan, for MS3 analysis only
Multiplexing Using Ion-Routing Multipole
Up to 10 precursors per scan using quadrupole mass filter
Polarity Switching
One full cycle in 1.1 sec (one full scan in positive mode and one full scan in negative mode at resolution setting of 35,000)
